DT-110X

DT-110X

Alphanumeric industrial display with 100mm character height (visible from 50 meters), with RS-232 and RS-485 / RS-422 serial port that allow communication with different communication protocols. The DT-X displays are intended to be governed by a PC computer, a PLC, or any device with RS-232 or RS-485 serial output.

The application of these displays is very suitable for all types of industrial environment needs.

With the RS-232 serial line, the maximum recommended working distance is 10 meters, while with the RS-485 serial line you can reach 1,000 meters.

The team can have three different types of work mode:

Display of a single message.
Display of chained messages in autonomous operation.
Display of multiple messages stored in memory.

The teams allow you to combine text messages with:

Variable values such as external probe values, number of parts, vehicle license plates, shift, loading docks or any value passed from a PLC, SCADA system or network.
Calendar date and time, obtained from the clock that the device has incorporated.

Additional information
Communication protocols
Dimensions
Options
Downloads

Additional information

Communication ports	RS-232, RS-485/422
Characters	LED, 5 x 7 dot matrix
Number of characters per line	6, 13, 20 or 26 characters
Lines number	1 to 8 lines
Number of faces	1, 2
Reading distance	50 meters
Characters color	Red leds
Protection level	IP41, optional IP65 in 1-line displays or IP54 in 2 to 8-line displays
Character brightness	1000 lux or high brightness (Outdoor)
Power supply	88VAC to 264VAC 47 to 63Hz, optional 24 VDC
Protocols	Lartet, Modbus, ASCII, Host-Link (Option RS-422), S7-200…

Communication protocols

Lartet protocol The message sent is kept on the display of the display in an internal “buffer” until the arrival of a new message.
Modbus protocol. Follow the specifications of this protocol. RTU mode
ASCII protocol. It is an easy-to-use protocol that does not use CRC.
Host-Link protocol To connect with Omron PLCs using the Host-Link protocol. For the connection with the Host-Link protocol you can use the RS232 or RS-422 (4-wire) connection but not the RS485. To order a device with the RS422 option, it must be indicated in the order.
Protocol S7-200. To connect to Siemens PLCs of the S7-200 series.

Dimensions

Number of lines	Characters per line	Width (mm)	Height (mm)	Deep (mm)
1 line	6 characters	666	177	120
	13 characters	1.276	177	120
	20 characters	1.886	177	120
	26 characters	2.496	177	120
2 lines	6 characters	666	378	120
	13 characters	1.276	378	120
	20 characters	1.886	378	120
	26 characters	2.496	378	120
3 lines	6 characters	666	591	120
	13 characters	1.276	591	120
	20 characters	1.886	591	120
	26 characters (*)	1.290	591	120
4 lines	6 characters	666	805	120
	13 characters	1.276	805	120
	20 characters	1.886	805	120
5 lines	6 characters	666	1.018	120
	13 characters	1.276	1.018	120
	20 characters	1.886	1.018	120
6 lines	6 characters	666	1.232	120
	13 characters	1.276	1.232	120
	20 characters	1.886	1.232	120

Options

IP65 Option (Outdoor): Increase the protection level of the display to IP65 (1 line displays).
Option IP54: Increase the protection level of the display to IP54 (2 to 8 line displays).
Stainless steel box (IP65): The display is manufactured in stainless steel box, suitable for marine environments, food and pharmacy, perfectly fulfilling the characteristics on which the HACCP regulations are based. (In 1 line and 6 character displays).
High luminosity characters: It allows to ensure a good contrast with direct exterior light (only in displays with option IP54 or IP65).
Double-sided option: Double-sided display manufacturing.
24VDC power option: Allows the display to be powered at 24VDC.
TH option: It allows to connect a temperature and humidity probe supplied by Lartet, showing its value.