DC-24THV2

The numerical displays of the DC-24 and DC-25 series are a combination of thermometer and hygrometer in the same display showing the ambient temperature and relative humidity in a single format.

The DC-24 displays support from one to five probes, calculating the average value of all of them. It automatically detects the connected probes and displays their status after initializing the equipment. The temperature and humidity probe is integrated in a passenger compartment, which allows easy placement using the support provided. The recommended position of the probe is 1.7m from the ground. Optionally they can have connection by serial line RS-485, Ethernet or Wifi.

The DC-25 displays are aesthetically identical devices to the DC-24, but do not have a temperature and humidity probe. They must receive the information via the RS-485, Ethernet or Wifi serial line.

Additional information
Options
Downloads

Additional information

Dimensions	440 × 240 × 60 mm
Data display	Humidity, Temperature
Number of faces	1, 2
Reading distance	50 meters
Digit height	100mm
Digit brightness	1000 lux
Digit color	Red leds, optional blue, green or white
Protection level	IP41
Maximum use margin	-10ºC to 60ºC
Power supply	100V to 240VAC 50/60Hz

Options

Repeater option: Display without temperature and humidity probe. Its application is for repeaters of probe devices or to receive information from other control equipment (DC-25).
Double-sided option: Manufacturing of the equipment on two sides of the display.
Color option B: Displays the time in blue digits.
Color option G: Shows the time in green digits.
Color option W: Shows the time in white digits.
RS-485 connection option: It allows sending the registered values to other devices through the RS-485 connection.
Ethernet connection option: Send the registered values to other devices through the Ethernet network.
Wifi connection option: Send the registered values to other devices through the Wi-Fi network.