| Communication ports | Ethernet |
|---|---|
| Characters | LED, 5 x 7 dot matrix |
| Number of characters per line | 20 or 40 characters |
| Lines number | 2, 4, 6 or 8 lines |
| Number of faces | 1, 2 |
| Reading distance | 15 meters |
| Characters color | Red leds |
| Character brightness | 1000 lux |
| Protection level | IP41, optional IP65 in 2-line displays or IP54 in 4 to 8-line displays |
| Power supply | 88VAC to 264VAC 47 to 63Hz, optional 24 VDC |
| Protocols | TDL, TCP/IP UDP/IP and Modbus/TCP. |
DT-203NE
Alphanumeric industrial display of 30mm character height (readable from 15 meters) of control with digital input and Ethernet connection can be configured to work with TCP / IP, UDP / IP and Modbus / TCP protocol.
The selection of the parameters and the communication protocol is carried out by means of a couple of buttons with an easy programming code system.
The field of application of these displays is very wide in all types of industrial applications using the advantages of the Ethernet network. It can be used to display values of a Scada program, alarm messages from a PLC, message messages, commercial information.The teams allow you to combine text messages with:
- Variable values such as external probe values, number of parts, vehicle license plates, shift, loading docks or any value passed from a PLC, SCADA system or network.
- Calendar date and time, obtained from the clock that the device has incorporated.
The network connection options of the device allow you to:
- Show the data generated from a PC platform such as production controls, notice board, Andon messages of a SCADA system.
- Display of messages from a PLC, such as alarms, part counters, production status (start / stop).
Additional information
Dimensions
Dimensions
| Number of rows | Characters per row | Width (mm) | Height (mm) | Deep (mm) |
|---|---|---|---|---|
| 2 rows | 20 characters | 615 | 177 | 120 |
| 40 characters | 1.170 | 177 | 120 | |
| 4 rows | 20 characters | 615 | 317 | 120 |
| 40 characters | 1.170 | 317 | 120 | |
| 6 rows | 20 characters | 615 | 464 | 120 |
| 40 characters (*) | 1.170 | 464 | 120 | |
| 8 rows | 20 characters | 615 | 618 | 120 |
| 40 characters (*) | 1.170 | 618 | 120 |
Details
Details
For programming the texts and variables in the EEPROM (non-volatile memory) of the display, the serial line is used for communication with a PC.
The PC uses the TDLWin editor program (downloadable from the Lartet website); messages are written on it and sent to the viewer. The editor supports special effects: negative or intermittent characters, itinerant messages.
The displays support two types of connections via the serial line: RS-232 and RS-485.
The display connection is made through a DB9 connector located on the bottom of the device.
Downloads
Installation / assembly manual
To download these files you must be registered. You can register here
Drivers
